RING KHODRO PARS Company is prepared to collaborate with universities and research centers in conducting demand-driven theses and research projects in its relevant areas of interest.
1. Design and fabrication of an oil separation system to reduce oil consumption as coolant
2. Study and identification of an alternative to oil-based coolant in Gap Stainless Steel Narrow filtration systems
3. Simulation and investigation of the Gas Port concept for the piston ring of the EF7 Plus engine
4. Investigation and simulation of the effect of first-ring geometric parameters on piston ring flutter
5. Three-dimensional simulation of piston ring behavior in the engine to optimize oil consumption and crankcase vapor rate
6. Experimental study of the effect of PVD coating parameters on the outer surface of the piston ring on coating adhesion and wear resistance
7. Numerical study of the effect of cylinder distortion on oil consumption during piston ring operation in the engine
8. Study, investigation, and development of a comprehensive failure analysis of scuffing in the engine
9. Numerical investigation of the effect of surface roughness parameters on oil consumption in the engine
10. Extraction of the piston ring profile based on parametric product specification data
11. Design of the manufacturing process for a piston ring end-gap gauge (feeler gauge)
12. Design and fabrication of a laboratory piston ring coating system for depositing CrN coating by PVD
13. Design of cutting tool materials for carbide cast irons with a hardness of 45 HRC
14. Extending the life of tools and fixtures using coating methods and replacing cast materials with tool steel
15. Design and fabrication of CBN tools (including five groups)
16. Design of colored coatings for piston rings
17. Design of coating materials for cast bushings with rough surfaces
18. Design of cleaning materials for pattern plates in the sodium silicate process
19. Reconditioning of worn machining tools
20. Design of a deburring and polishing process for piston ring springs using materials cheaper than phosphoric acid
21. Design of inorganic liquid quenching media
22. Recovery of chromic acid solutions in chromium plating processes
23. Design and fabrication of an in-line piston ring counting system during production
24. Design of a software-based in-process tracking system
25. Extraction of the piston ring curvature pattern using image processing
26. Design of rolling tools for steel piston ring coils
27. Design of CNC oval-turning lathe components as a replacement for the cam-based method
28. Automation of the light transmission inspection process
29. Automation of the height measurement process
30. Simulation of the piston ring honing process to reduce honing bush consumption and honing time
31. Design of ultrasonic cleaning equipment for piston rings